86-519-85195566
No. 3, Tianshan Road, Xinbei Dist., Changzhou, Jiangsu, China (Mainland)
Introduction
TH2827B is an new impedance analyzer,LCR Meter, easy operation, accurate and stable reading.With test frequency from 20Hz to 500kHz, frequency resolution of 1mHz, wide test signal level range from 10mV to 2V, measurement speed up to 13ms/time, TH2827B can be used to inspect electronic components, not only for measurement parameters TH2819 has, but DCR measurement. The meter has ±5V (±50mA) and optional 1A internal DC bias source and external inductance bias sources to inspect inductive components.
With high speed, wide test range, and 6-digit resolution, TH2827B can be used in quality control on production line, incoming inspection and lab measurement.
Measurement function | ||
Measurement parameters | |Z|, |Y|, C, L, X, B, R, G, D, Q, θ ,DCR | |
Basic accuracy | 0.01% | |
Equivalents circuit | Serial, Parallel | |
Math function | Absolute value deviation, percentage deviation | |
Range mode | Auto, Hold, Manual | |
Trigger mode | Internal, Manual, External | |
Measurement time (≥1kHz) | Fast: 13ms, Medium: 67ms, Slow: 187ms | |
Average time | 1—256 | |
Delay time | 0—999, with the step of 100μs | |
Correction | Open, Short, Load | |
Measurement terminal | 5-terminal | |
Display mode | Direct, Δ, Δ%, V/I (voltage/current monitor) | |
Display | 800×RGB×480 7 inch TFT LCD Display | |
Test signal | ||
Test signal frequency | 20 Hz-500kHz | |
Frequency min. resolution | 1mHz | |
Output impedance | 30 Ω, 50Ω 100 Ω | |
Test signal level | Normal: 5 mV-2 V Accuracy: 10% Constant level: 10 mV-1 V Accuracy: 5% | |
Level min. resolution | 1mV | |
DC bias source | Internal | 0V, 1.5V, 2V, accuracy: 1% |
Optional | TH1902A 0-10V DC bias voltage, 0-100mA DC bias current | |
TH1902B 0-1A DC bias current | ||
Measurement display range | ||
|Z|, R, X | 0.00001 Ω — 99.9999 MΩ | |
DCR | 0.001 Ω — 99.9999 MΩ | |
|Y|, G, B | 0.00001µS — 99.9999 S | |
C | 0.00001 pF — 9.9999 F | |
L | 0.00001 µH — 9999.99 H | |
D | 0.00001 — 9.9999 | |
Q | 0.00001 — 9999.9 | |
θ (DEG) | -179.999º — 179.999 º | |
θ (RAD) | -3.14159 — 3.14159 | |
Δ% | -999.999% — 999.999% | |
Others | ||
Comparator | 10-bin sorting, bin counter | |
Storage | 100 sets of LCRZ measurement settings saved | |
Interface | RS232C, HANDLER, LAN,GPIB (optional), USB HOST (optional) | |
